• 0.8 ohm Mesh Pod: Best for a warm, flavorful MTL vape, operating between 13W and 18W.
• 1.2 ohm Mesh Pod: Designed for a tighter draw and a stronger throat hit, operating between 9W and 15W (ideal for nicotine salts).

Compatibility & Features

• Device Compatibility: Fully compatible with the Nevoks APX S1, APX S2, APX C1, and Pagee Air pod kits.
• Airflow Adjustment: Rotating the pod 180 degrees when inserting it into the device allows you to easily switch between a tight or smooth MTL draw.

Where to Buy in the UAE

• Vapeproplanet: Offers the Nevoks APX S1 Cartridge Pack online with local delivery options.
• Voopoo-vape: Provides the Nevoks APX S1 Replacement Pods with coverage across Ras Al Khaimah, Dubai, Abu Dhabi, and Sharjah.
• Ecigguae: Frequently stocks Nevoks hardware and accessories with fast shipping options across the UAE.
• Vape-Abu-Dhabi: Stocks all types of Nevoks Products at the best price. Therefore, you must stock.

Do you want to replace the cartridge of your APX S1 podmod, or simply have a spare tank with a different flavor?

Well, this pack of 3 disposable cartridges is made for you.

They have a 2ml tank and come with a sealed coil of either 0.8Ω or 1.2Ω.

Nevoks’s APX S1 cartridge

Three disposable cartridges for the APX S1 podmod

These cartridges are specifically designed for the APX S1 podmod and are easily clipped onto the device using the magnetic connector. The coils are pre-installed in the cartridges, so you just have to fill them with e-liquid before use.

The kit comes with one of two sets of MTL (indirect inhale) coils :

• Either three APX S1 2ml cartridges with a sealed 0.8 ohm coil, for a tight MTL vape
• Or Three APX S1 2ml cartridges with a sealed 1.2 ohm coil, for a very tight MTL vape. These coils particularly suited to e-liquids with nicotine salts or CBD.

Connecting the cartridge to the magnetic connector of the APX S1 podmod

A pre-installed coil

The APX S1 cartridge equipped with a sealed coil, characteristic of so-called ‘disposable’ cartridges.

Thus, the coil pre-installed in the tank and cannot be changed. Once the cartridge worn out (after about two or three weeks, depending on your vaping habits), simply throw it away and replace it.

An adjustable draw

Do you want to adjust your draw? No problem! Nevoks has it all figured out.

Simply rotate the APX S1 cartridge by half a turn to switch from a tight draw (restrictive MTL) to a slightly airier draw (loose MTL), and vice versa!

A side-fill tank

The APX S1 cartridge can hold up to 2ml of e-liquid and equipped with a waterproof anti-condensation system.

Our advice for this cartridge would be to use e-liquids with a high propylene glycol content (at least 50% of PG).

The APX S1 cartridges filled from the side:

1. Lift the silicone tab on the side of the cartridge
2. Tilt the cartridge backward slightly, then insert the tip of your bottle of e-liquid into the hole
3. Fill with e-liquid, but not to the brim
4. Close the silicone tab
5. Put the cartridge back onto its magnetic connector
6. Wait 5 to 10 minutes until the coil soaked in e-liquid
7. Inhale and enjoy!

Filling the APX S1 cartridge

The APX S1 cartridges manufactured by Nevoks. They are only available in packs of 3, with the coil value of your choice.